Peelaway Marine logo

Peelaway® Marine Anti-fouling Remover

  • Peelaway Marine

Peelaway Marine logo

Peelaway® Marine Anti-fouling Remover

Product description:

Peelaway® Marine Antifouling Remover is specially formulated to effectively remove multiple layers of anti-foul coatings with one application saving time by reducing the need for repeated scraping.

Its patented water based poultice system means the product remains active and works without rapidly drying out. The special poultice blanket supplied enables stripped anti-foul paint to be collected easily and so reduces boatyard/dockside contamination risk. 

The light paste consistency and is easy to apply to vertical surfaces and difficult shapes. It can be applied with a brush or trowel and for larger areas an airless sprayer can be used. Always carry out a test patch before general application. Suitable for most hull types including GRP, wood, steel and concrete. 

Size: 4kg & 10kg (Sample pots and additional poultice blankets are available on request).

Peelaway® Marine, less time under your boat, more time enjoying it.


Click for Peelaway 1 & 7

How can we help?

Peelaway Marine Testimonials

A 36 ft Moody Halberdier built in 1980 undergoing complete restoration in Baltic Wharf Boatyard Totnes. Estimates 14 layers of old Anti-foul in patchy peaks & troughs/craters.  Jamie said “ I tried caustic stripper which was ineffective as it took a layer at a time and I got burned by dry scrapings despite full PPE. Peelaway Marine takes the agony out of doing it by hand”

Haemony - Owner Jamie Bardolf-Smith from Rattery, Devon

A 34 foot racing yacht with badly worn Anti-foul needing replacement. Peelaway Marine was used with precise timing to strip back to the primer layer in just 6 hours. Owner Richard Hunn said "I’m really pleased with Peelaway Marine and I can see the benefits commercially".  

Sobek - Owner Richard Hunn of Devon Boatworks